PowerStar Point-of-Use Features and Specs
PowerStar Point-of-Use Models
 
   Features & Specifications

PowerStar comes in 4 models to serve a wide range of applications. Finding the right model depends upon your desired flow rate and temperature. Use the charts on this page to find the model best suited to your needs.

NOTE: The inlet water temperature plus the degree rise from the heater will be the final delivered temperature. Only limited flow rates of hot water can be drawn from a hot water outlet, refer to flow/degree rise table below.

MODEL Volts Amps Element
Resistance 		High
Setting 		Low
Setting 		Temperature Rise (°F) at Flow Rate (GPM)
.50GPM .75GPM 1.0GPM 1.5GPM 2.0GPM 2.5GPM
AE3.4* 120-110 27 2x8Ω 3.4-3.0kW -- 41°F 28°F 20°F n/a n/a n/a
AE7.2 240-220 30 2x16Ω 7.2-6.1kW -- 96°F 63°F 48°F 32°F 24°F n/a
  240-220 15 1x16Ω -- 3.6-3.05kW 48°F 32°F 24°F 16°F 12°F n/a
AE9.5 240 40 2x12Ω 9.5kW -- n/a 84°F 64°F 42°F 32°F n/a
240 20 1x12Ω -- 4.75kW n/a 42°F 32°F 21°F 16°F n/a
208 35 2x12Ω 7.1kW -- n/a 64°F 48°F 32°F 24°F n/a
208 18 1x12Ω -- 3.5kW n/a 32°F 24°F 16°F 12°F n/a
Thermostatic Model:
NOTE: Maximum degree rise is based on incoming water temperature of 50°F.
AE12** 240 50 - 12.0kW - 72 72 72 52 42 -
   

All models are only 6 lbs.
GPM = gallons per minute.
NOTE: Average hand washing temperature is 105° F.

*AE3.4 includes a 0.5 GPM faucet aerator for optimal performance.
** Designed for operation on 240 volt only.

High/Low kW settings possible within some models.
   
PowerStar Models
 

Note: Specifications and product information subject to change without notice.